Antminer S7 ~4.73TH/s @ .25W/GH 28nm ASIC Bitcoin Miner

Antminer S7 ~4.73TH/s @ .25W/GH 28nm ASIC Bitcoin Miner
Antminer S7 ~4.73TH/s @ .25W/GH 28nm ASIC, photo 1 Antminer S7 ~4.73TH/s @ .25W/GH 28nm ASIC, photo 2
Model:

AntMiner AMS7473

Color:

Batch 19


Hash Rate: 4.73 TH/s ±5% Power Consumption: 1293W ±10% Power Efficiency: 0.25 W/GH ±10% Requires 10x 6 pin pci-e connectors Power Supply required and sold seperately
This product is currently not available and cannot be purchased. It means that we have no merchant offers for this product at the moment or it was discontinued by the manufacturer.
Description

Antminer S7 ~4.73TH/s @ .25W/GH 28nm ASIC Bitcoin Miner

Brand AntMiner
Model AMS7473
Color Batch 19
Type Personal Computer
Platform Linux
Item Dimensions 11.85 × 6.1 × 4.84 inches, 10 pounds
Package Dimensions 16 × 10.5 × 9 inches, 9 pounds
S7 Specifications:
1. Hash Rate: 4.73 TH/s ±5%
2. Power Consumption: 1293W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.25 W/GH ±10%(at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 135x BM1385
6. Dimensions: 301mm(L)*123mm(W)*155mm(H)
7. Cooling: 1x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M

Please note the following:
1. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. Figures provided are at the wall, with AC/DC 93% efficiency, and 25°C ambient temp.
2. PSU: A power supply unit is not included, and you will need to purchase one separately. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required on each board. Do not connect more than one PSU to the same hashing board!
3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.
The APW3-12-1600-B2 power supply is recommended for use with the S7. One of these power supplies will support one S7.
See Also

Disclaimer: Pictures and description of Antminer S7 ~4.73TH/s @ .25W/GH 28nm ASIC Bitcoin Miner have been updated on Sunday, March 19, 2017 4:25 PM. Since we are not updating information manually we cannot guarantee 100% accuracy of the pictures, description and other related information. You should by no means purchase this item based on the description or the picture provided. Most accurate product information can be found on the manufacturer's website.