Kreg RAC Right Angle Clamp
 | Kreg : Tools & HardwareCustomer Rating: 14 reviews Recommend |
|---|
- Securely holds work pieces at a 90 degree angle
- Two arms swivel to adjust to work piece dimensions and anchor work pieces
- 4-1/2 inch reach for added flexibility
- Easy release handle simplifies operation
WE NEED THE CORRECT IMAGE FOR THIS (THE RIGHT ANGLE CLAMP IS SHOWN, BUT IS ALREADY ON AMAZON). SEEMS LIKE 34445 MIGHT BE THE SAME CLAMP? AT LEAST THE IMAGE MIGHT BE USEABLE.
Large face clamp reaches up to 6" and ensures a perfectly flush joint every time! Large pad keeps clamp from marring wood. Perfect for flat stock such as face frames, mitered picture frames and other similar joints.
The Kreg Right Angle Clamp holds work pieces at a 90 degree angle. It has a steel dowel on one arm to fit into the pockethole and anchoring your work piece against the second work piece to be joined. An opposite arm has a 180 degree swiveling pad that automatically adjusts to the dimensions of the work piece while you finish the joint by driving a screw into the adjacent pocket hole. This clamp with a 4-1/2-inch reach and easy release handle is particularly useful for assembling box joints and joining a cabinet carcass to face frames.
Title: Kreg RAC Right Angle Clamp
Sales Rank: 674 in Tools
Manufacturer: Kreg, Model: RAC
Item Dimensions: 13 x 5.9 x 0.59 inches, 1.7 pounds
Package Dimensions: 13.8 x 6.9 x 1.2 inches, 1.65 pounds
- No substitute for this tool
- This clamp works flawlessly every time. Conceptually, it's very simple. It replaces one of the flats on a normal Kreg clamp with a pin that fits in the pocket hole. Use the clamps in one or more pocket holes while you drive the screws into the others. If you need 100% square accuracy, you can hold a square in place against… More reviews
- Can find this elsewhere for cheaperG
- This is a great product but if you look around you can find this clamp cheaper. More reviews
- Work great when drilling
- I bought two of these clamps and glad I did. On occasion, I use to hold the wood in place on both ends or at a corner. I can drill a hole, clamp it then drill the other end and/or adjoining board, knowing the boards are going to be precisely in place when I put in the screws. Now its not moving.
The quality is good and will last… More reviews
- Right Angle Clamp
- Great clamp for Kreg's pocket screw holes. I order the extra clamp to go with the kit I purchased earlier. Good buy More reviews
- works amazingly well
- The RAC makes a creating a tight flush joint a snap. It actually is better then a second set of hands unless those hands can press 350lbs. A second clamp would be a good idea on larger projects. I was frustrated as the spring fell off a few times at first but I took care of it and it works fine now. More reviews
- Kreg SKO2 Pocket Hole Screw Kit
- Fine Woodworking
- Woodworking Basics: Mastering the Essentials of Craftsmanship
- Kreg R3 Pocket Hole Jig System
- Kreg DDS 3-Inch #2 Square Driver Bit and 6-Inch #2 Square Driver Bit for Kreg Pocket Hole Systems
